ASI Global PartitionsAccessibility symbol — ADA optionADA option

1-Stall Alcove ADA Partition Kit – Powder Coated Steel

SKU: TP1-AL-ADA-BE · Alcove · 60″ W × 60″ D

ADA option only. Final compliance depends on approved layout and installation; not an ADA-compliance certification.

Illustrative Powder Coated Steel Alcove kit assembly, SKU TP1-AL-ADA-BE; example finish, left-hand shown; not a verified ASI assembly or fabrication drawing
Illustrative image · left-hand shown
ASI detail-guided illustration · not a fabrication drawing.
Example finish: Almond 2103. The assembly image does not change with door handing.
Review the supplied series, finish and applicable warranty in checkout.
1-Stall Alcove ADA Partition Kit – Powder Coated Steel. SKU TP1-AL-ADA-BE. Illustrative nominal floor plan: 60 inches wide by 60 inches deep; 36-inch door, outswing, left-hand hinge viewed from the front. Powder Coated Steel; 58-inch panels and 58-inch door; Floor-mounted, overhead-braced. Alcove walls · front filler panels. Front pilasters, door, filler panel(s), headrail and mounting hardware. Final opening and filler widths need confirmation. Actual wall and support conditions need confirmation; not a manufacturer drawing, build specification or ADA-compliance certification.60″ wide60″ deep36″ door · OutswingL hinge · viewed from front
Illustrative nominal layout

Nominal key plan

Existing back, left and right structural walls. Front filler panels span the alcove opening; no side partition panels.

Thick dark lines:
structural walls.
Thin gray lines:
partition panels / front fillers.
Red arc:
door swing.

Nominal dimensions: 60″ wide × 60″ deep; 36″ door · Outswing · left-hand hinge viewed from the front.

Shop drawings set final clear dimensions and component sizes. Verify your field measurements before approving the order.

Walls, side panels and fillers reflect the owner-source nominal layout. Actual wall and support conditions, clear dimensions and final kit contents require confirmation. This is not a manufacturer drawing, build specification or ADA-compliance certification.

$1,402.23

Exact kit material price · per kit

Hinge side is viewed from the front. Quantity: 1–99 whole kits. The nominal plan follows your hinge choice; the illustration always shows left-hand. Choose your confirmed finish during review.

Buy Now →

Cart review and Buy Now both require a confirmed finish, dimensions, delivery and final order approval before secure payment.

Illustrated finish is an example, not a color-bound offer. Available finishes are selected during review.

All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total).

Shipping and any applicable tax are separate from the kit material price. Installation and inside delivery are not included.

Kit specifications

Material
Powder Coated Steel
Nominal footprint
60″ W × 60″ D
Door
36″ · Outswing
Panel / door height
58″ / 58″
Layout / option
Alcove · ADA option
Mounting
Floor-mounted, overhead-braced
SKU
TP1-AL-ADA-BE
Source stall size
60" x 60" w/ 36" outswing door
Source-listed components
Front pilasters, door, filler panel(s), headrail and mounting hardware. Final opening and filler widths need confirmation.
Manufacturer / official specs
ASI standard material. Review supplied product specifications and available finishes in checkout

ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.

Optional help: Call Fred · 646-349-4040
Reference information

Owner-provided nominal dimensions. Clear dimensions and final shop drawings require confirmation.

Source-data-bound layout illustration, not a manufacturer photograph

Owner-attached JSON/CSV/HTML, November 19, 2026; owner-approved source price × 1.05

Internal draft ID: alcove-ada-baked-enamel (not a SKU).

Matching material reference · Powder Coated Steel

ASI technical data & warranty

Illustrated finish is an example, not a color-bound offer. The matching chart is a manufacturer reference; select only an available finish shown in checkout. Review the supplied construction, price and dispatch timing before payment. Call Fred if you need help.

3-year manufacturer warranty against powder-coat chipping, flaking, cracking or discoloration; repair or replacement at ASI’s discretion. See official warranty for terms and exclusions.

Manufacturer material/series reference. The supplied ASI series, final component sizes and applicable coverage must match your written order. Listed dimensions above remain the current nominal kit configuration.

Visual draft, not a verified ASI assembly. Headrail runs, component counts and hardware must follow the applicable ASI drawings without added or omitted pieces.

Material specifications, hardware & care
Material and finishspecific-series
Integrated Privacy powder-coated steel: galvannealed steel faces bonded to a honeycomb core; epoxy/polyester powder coat applied to phosphate-treated steel and baked to cure.
Standard FAOB dimensionsspecific-series
Door/panel height 58 inches; pilaster height 82 inches; floor clearance 12 inches. Door/panel thickness 1 inch; overhead-braced pilaster thickness 1-1/4 inches. Compartment width/depth are as scheduled on drawings, not a universal kit size.
Integrated privacy constructionspecific-series
No-sight system is integral to door construction and powder-coated during fabrication; add-on no-sight strips are not allowed.
Door widthspecific-series
24-inch minimum standard door and 36-inch minimum at accessible compartments; actual clear opening and compliance must be established by the project drawings.
Overhead-braced headrailspecific-series
Manufacturer-standard anodized aluminum anti-grip headrail. Exact front, side/return and any rear runs must follow the applicable ASI installation details and approved compartment layout; no extra rail is established by a generic rendering.
Door hardwarespecific-series
FAOB specification lists chromium-plated Zamac hardware, recessed top and bottom hinges with adjustable nylon cams, factory-prepared ASI Privacy Indicator latch with emergency access, coat hook/bumper, and theft-resistant fasteners. Two door pulls are specified for ADA doors; do not automatically add those to this standard kit.
Brackets and floor attachmentspecific-series
Chromium-plated Zamac stirrup brackets; 3-inch Type 304 stainless No. 4 satin Easy-Stall shoes, concealed threaded leveling, and 1/4-by-2-inch steel floor screws. Exact quantities and anchor/support details must follow the approved assembly drawings.
Hardware selection conflictconfiguration-confirmation
The product page advertises stainless steel hardware while the linked FAOB specification lists chromium-plated Zamac. Confirm which package ASI supplies before depicting exact hinges, latches, brackets or fasteners. Alpaco pedestals are an optional system, not interchangeable with the specified Easy-Stall shoe.
Care and maintenancemanufacturer-material
The linked official care PDF is a one-page title/contact sheet with no readable cleaning procedure, cleaner, dilution, or maintenance schedule. Only the warranty/specification requirement for proper maintenance is supported.
Color optionsoptional
Official guide lists White 2129, Charcoal 2123, Black 2127, Burgundy 2148, Metallic Silver 2171, Azure 2101, Royal Blue 2135, Sandy Beach 2150, Pepper Dust 3590, Gray 2125, Almond 2103, Khaki 2115, Dark Khaki 2109, Red 2145, and Sage 2141; actual colors may vary and colors may change without notice.
Verified headrail arrangement 1manufacturer-diagram / condition-specific
Manufacturer standard anodized aluminum anti-grip headrail is specified.
Verified headrail arrangement 2manufacturer-diagram / condition-specific
Headrail runs across tops of pilasters above panels and doors; plumb each pilaster and secure with headrail.
Verified headrail arrangement 3manufacturer-diagram / condition-specific
Assembly drawing shows return headrail perpendicular to front headrail over a pilaster, ending at labeled BACK WALL with F bracket wall connection.
Verified headrail arrangement 4manufacturer-diagram / condition-specific
No separate back-wall rail, rail along every structural side wall, or full-perimeter rail expressly required in reviewed documents.
Verified headrail arrangement 5manufacturer-diagram / condition-specific
Installation guide PDF p.14/printed p.9 depicts the return to BACK WALL; no exact one-stall rail cut/return count is scheduled. The two-page measuring guide has reference examples, not these exact manufacturer kit assemblies.
Verified assembly hardware 1manufacturer-diagram / condition-specific
The installation guide distinguishes inswing from outswing/ADA accessories. Pulls and outswing bumpers are conditional; the selected owner records remain standard24-inch inswing. Easy-Stall shoe and optional Alpaco pedestal assemblies must not be mixed.
Manufacturer warranty coverage & exclusions
  • Full ASI warranty PDF issued October 17, 2019; warranty period begins on the date of invoice.
  • Powder Coated Steel is covered for three (3) years against chipping, flaking, cracking, or discoloration.
  • Warranty applies to defects in material or workmanship under normal usage.
  • If defective during the period, ASI Global Partitions may repair or replace the material at its discretion, free of charge.
  • Repair or replacement is the purchaser’s sole remedy.
  • No credits or allowances are provided for labor or expenses relating to repair or replacement of covered components.
  • ASI disclaims incidental, consequential, and indirect damages caused by defects or delay in repair or replacement.
  • Warranty does not apply when vandalism, improper installation, or improper cleaning/maintenance contributed as just cause for failure.
  • Warranty extends to commercial and industrial purchasers and not to other persons, including consumers of the partitions.
  • Warranty is in lieu of all other express or implied warranties, including merchantability and fitness for a particular purpose.
  • The full warranty PDF gives no separate claim-submission procedure, claim deadline, or proof-of-purchase list beyond the invoice-date start.
  • The standard specification also states the three-year material warranty assuming proper maintenance.
  • Keep the merchant’s separate 1-year replacement-only warranty unchanged and separate from this manufacturer warranty.
Read the full ASI manufacturer warranty (PDF)
Official ASI technical documents
Final specification items to confirm
  • The correct current FAOB specification is available at ASI-Global-Spec_Integrated-Privacy-Powder-Coated-FAOB.pdf. The earlier saved filename incorrectly used an underscore after Integrated-Privacy; that incorrect link, not this current document, returned404.
  • The FAOB specification requires dimensioned compartment shop plans/elevations, component and anchoring details, and installation in accordance with approved shop drawings. An exact 36-by-60 one-stall component schedule and headrail cut/run plan are not established by the generic product page.
  • Do not add/remove front, side/return or rear rails, partition panels, pilasters, floor shoes, indicators, hinges or other hardware merely to make an illustration look plausible. Current AI renders remain unverified for exact ASI assembly accuracy.
  • Confirm the hardware package: the product page says stainless hardware, while the linked FAOB specification lists chromium-plated Zamac. Do not mix the two or substitute optional Alpaco pedestals for Easy-Stall shoes.
  • Do not advertise a fire rating, numeric acoustic rating, waterproof/wet-room use, specific cleaning chemicals, ADA compliance, stock, delivery timing, or price from these sources.
  • Do not make owner-nominal claims from an external ASI specification source; actual source36width60depth24inswing58height remains unaffected in the independent owner records.
  • Generic laminate pricing does not establish Moisture Guard; generic phenolic pricing does not establish Color-Thru or optional Class A; stainless standard Satin does not establish unsupported No. 4.
  • The manufacturer 3-year warranty must remain separate from the merchant’s 1-year replacement-only warranty.
  • Exact one-stall replica is not established by the generic ASI examples. Obtain the supplier-approved handed36-by60 shop drawing, component/package list and rail cut/return/end-connection schedule before changing or approving artwork. Current illustrations are not verified ASI assemblies.
Store ordering, shipping & warranty terms

Front pilasters, door, filler panel(s), headrail and mounting hardware. Final opening and filler widths need confirmation. Existing structural walls and installation are not included.

All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total). Inside delivery is not implied.

All sales are final. Every partition order is custom-built; cancellations, returns and refunds are not accepted after an order is placed. Payment approves the final drawing dimensions, or the items as quoted and described. Review all dimensions and details before approving.

Have a qualified professional verify measurements and handle installation. Incorrect measurements, improper installation and damage after delivery are not covered by Partition Stalls.

Partition Stalls separately warrants powder-coated materials against defects in workmanship and construction for one year from purchase under normal use and proper care. Remedy is replacement materials only, without labor credits or other replacement costs. Installation errors, vandalism and improper use, care or maintenance are excluded. This store warranty is distinct from ASI manufacturer coverage.

Taxes are not currently collected; purchases are not tax-exempt. Review dispatch timing for the supplied material and selected finish in checkout. Quick-ship or delivery eligibility is not established by this illustrative ad.

Buy Now opens exact-kit order review. Select your finish, verify dimensions and delivery, and approve the final items before secure payment. Call Fred only if you need help. ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.