
1-Stall Alcove Partition Kit – Plastic Laminate
SKU: TP1-AL-STD-PL · Alcove · 36″ W × 60″ D

ASI detail-guided illustration · not a fabrication drawing.
Example finish: Maple 9918. The assembly image does not change with door handing.
Review the supplied series, finish and applicable warranty in checkout.
Nominal key plan
Existing back, left and right structural walls. Front filler panels span the alcove opening; no side partition panels.
- Thick dark lines:
- structural walls.
- Thin gray lines:
- partition panels / front fillers.
- Red arc:
- door swing.
Nominal dimensions: 36″ wide × 60″ deep; 24″ door · Inswing · left-hand hinge viewed from the front.
Standard alcove opening: up to 108″ wall to wall, separate from the nominal stall footprint; not a field measurement.
Shop drawings set final clear dimensions and component sizes. Verify your field measurements before approving the order.
Walls, side panels and fillers reflect the owner-source nominal layout. Actual wall and support conditions, clear dimensions and final kit contents require confirmation. This is not a manufacturer drawing, build specification or ADA-compliance certification.
$1,430.92
Exact kit material price · per kit
Hinge side is viewed from the front. Quantity: 1–99 whole kits. The nominal plan follows your hinge choice; the illustration always shows left-hand. Choose your confirmed finish during review.
Cart review and Buy Now both require a confirmed finish, dimensions, delivery and final order approval before secure payment.
Illustrated finish is an example, not a color-bound offer. Available finishes are selected during review.
All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total).
Shipping and any applicable tax are separate from the kit material price. Installation and inside delivery are not included.
Kit specifications
- Material
- Plastic Laminate
- Nominal footprint
- 36″ W × 60″ D
- Door
- 24″ · Inswing
- Panel / door height
- 58″ / 58″
- Layout / option
- Alcove · Standard
- Mounting
- Floor-mounted, overhead-braced
- SKU
- TP1-AL-STD-PL
- Source stall size
- 36" x 60" w/ 24" inswing door (alcove up to 108" wall to wall)
- Standard alcove opening
- Up to 108″ wall to wall; filler widths require confirmation. This is separate from the nominal stall footprint.
- Source-listed components
- Front pilasters, door, filler panel(s), headrail and mounting hardware. Final opening and filler widths need confirmation.
- Manufacturer / official specs
- ASI standard material. Review supplied product specifications and available finishes in checkout
ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.
Optional help: Call Fred · 646-349-4040Reference information
Owner-provided nominal dimensions. Clear dimensions and final shop drawings require confirmation.
Source-data-bound layout illustration, not a manufacturer photograph
Owner-attached JSON/CSV/HTML, November 19, 2026; owner-approved source price × 1.05
Internal draft ID: alcove-standard-plastic-laminate (not a SKU).
Matching material reference · Standard Plastic Laminate
ASI technical data & warranty
Illustrated finish is an example, not a color-bound offer. The matching chart is a manufacturer reference; select only an available finish shown in checkout. Review the supplied construction, price and dispatch timing before payment. Call Fred if you need help.
This kit is Standard Plastic Laminate, with a 2-year manufacturer warranty under the standard specification. Moisture Guard is a separate optional construction and is not sold at these kit prices; its five-year warranty and quickship program do not apply.
Standard Plastic Laminate: 2-year manufacturer warranty against discoloration or delamination, assuming proper maintenance according to ASI's recommendations. The separate Moisture Guard five-year warranty does not apply to this kit.
Manufacturer material/series reference. The supplied ASI series, final component sizes and applicable coverage must match your written order. Listed dimensions above remain the current nominal kit configuration.
Visual draft, not a verified ASI assembly. Headrail runs, component counts and hardware must follow the applicable ASI drawings without added or omitted pieces.
Official ASI color charts & technical data
Material specifications, hardware & care
- Material identitystandard-FAOB
- Standard Plastic Laminate — Floor Anchored/Overhead Braced. Decorative plastic laminate pressure-bonded to a wood core; this is not Moisture Guard construction.
- Standard FAOB dimensionsstandard-FAOB
- Door/panel height 58 inches; pilaster height 82 inches; height above floor 12 inches. Project compartment width/depth and anchoring follow approved shop drawings, not a universal kit assembly.
- Door widthstandard-FAOB
- 24-inch minimum standard door; 36-inch minimum at ADA compartments. The owner nominal kit width, door swing and handing remain source-bound; actual clear opening and project accessibility must be verified.
- Standard hardware and headrailstandard-FAOB
- Manufacturer-standard chromium-plated Zamac hardware, anodized-aluminum anti-grip headrail, Easy Stall shoe and 1/4-by-2-inch steel floor screws. Exact component quantities, connections and rail runs follow approved project shop drawings.
- Standard colorsstandard-material
- Choose only Standard Plastic Laminate finishes returned by checkout. The official Standard Plastic Laminate color guide is a color reference, not the Moisture Guard color/quickship offering. Printed and monitor colors may vary; review physical samples when color is important.
- Warrantystandard-FAOB
- Two-year manufacturer warranty against discoloration or delamination, assuming proper manufacturer-recommended maintenance; Standard Plastic Laminate specification section 1.7.
- Care and maintenancemanufacturer-material
- Follow ASI manufacturer-recommended maintenance. No unverified cleaner, chemical or waterproof-use instruction is established here.
- Optional construction excludedoptional-reference-only
- Moisture Guard uses a separate specification, proprietary edge banding and a separate warranty. It is optional/reference only and is not supplied or sold at these Standard Plastic Laminate kit prices.
Manufacturer warranty coverage & exclusions
- ASI Standard Plastic Laminate specification, section 1.7: manufacturer's standard warranty against discoloration or delamination for two (2) years, assuming proper maintenance according to the manufacturer's recommendations.
- The separate ASI general warranty card lists Moisture Guard Plastic Laminate, not Standard Plastic Laminate. Its five-year term must not be applied to this standard kit.
- Review the Standard Plastic Laminate specification for the applicable two-year coverage; do not infer additional claim procedures or a longer warranty from a different construction.
- The merchant's separate one-year replacement-only warranty covers powder-coated materials only, not this laminate kit.
Official ASI technical documents
Final specification items to confirm
- Use only the Floor Anchored/Overhead Braced section of the official GLOBAL-PLAM-SPECS_4in1.pdf; other mounting systems are outside these kits.
- This sale is Standard Plastic Laminate, not Moisture Guard. Do not transfer Moisture Guard edge-banding performance, its five-year warranty or its quickship program to this kit.
- Owner-source nominal dimensions remain unchanged. Clear dimensions, exact component quantities, anchoring and rail runs require approved project shop drawings; generic illustrations are not fabrication drawings.
- No inventory, delivery guarantee, waterproof-use claim, unverified fire rating or automatic ADA compliance is established by these references.
- The merchant powder-coated one-year replacement-only warranty does not cover this laminate material.
Store ordering, shipping & warranty terms
Front pilasters, door, filler panel(s), headrail and mounting hardware. Final opening and filler widths need confirmation. Existing structural walls and installation are not included.
All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total). Inside delivery is not implied.
All sales are final. Every partition order is custom-built; cancellations, returns and refunds are not accepted after an order is placed. Payment approves the final drawing dimensions, or the items as quoted and described. Review all dimensions and details before approving.
Have a qualified professional verify measurements and handle installation. Incorrect measurements, improper installation and damage after delivery are not covered by Partition Stalls.
Partition Stalls separately warrants powder-coated materials against defects in workmanship and construction for one year from purchase under normal use and proper care. Remedy is replacement materials only, without labor credits or other replacement costs. Installation errors, vandalism and improper use, care or maintenance are excluded. This store warranty is distinct from ASI manufacturer coverage.
Taxes are not currently collected; purchases are not tax-exempt. Review dispatch timing for the supplied material and selected finish in checkout. Quick-ship or delivery eligibility is not established by this illustrative ad.
Buy Now opens exact-kit order review. Select your finish, verify dimensions and delivery, and approve the final items before secure payment. Call Fred only if you need help. ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.
