ASI Global PartitionsStandard

1-Stall Between Walls Partition Kit – Solid Plastic (HDPE)

SKU: TP1-BW-STD-HD · Between Walls · 36″ W × 60″ D

Illustrative Solid Plastic (HDPE) Between Walls kit assembly, SKU TP1-BW-STD-HD; example finish, left-hand shown; not a verified ASI assembly or fabrication drawing
Illustrative image · left-hand shown
ASI detail-guided illustration · not a fabrication drawing.
Example finish: Blue 9509. The assembly image does not change with door handing.
Review the supplied series, finish and applicable warranty in checkout.
1-Stall Between Walls Partition Kit – Solid Plastic (HDPE). SKU TP1-BW-STD-HD. Illustrative nominal floor plan: 36 inches wide by 60 inches deep; 24-inch door, inswing, left-hand hinge viewed from the front. Solid Plastic (HDPE); 55-inch panels and 55-inch door; Floor-mounted, overhead-braced. Between walls · front only. Front pilasters, door, headrail and mounting hardware. No side panels: the stall fits an opening between existing walls. Actual wall and support conditions need confirmation; not a manufacturer drawing, build specification or ADA-compliance certification.36″ wide60″ deep24″ door · InswingL hinge · viewed from front
Illustrative nominal layout

Nominal key plan

Existing back, left and right structural walls. Front only; no side partition panels.

Thick dark lines:
structural walls.
Thin gray lines:
partition panels.
Red arc:
door swing.

Nominal dimensions: 36″ wide × 60″ deep; 24″ door · Inswing · left-hand hinge viewed from the front.

Shop drawings set final clear dimensions and component sizes. Verify your field measurements before approving the order.

Walls, side panels and fillers reflect the owner-source nominal layout. Actual wall and support conditions, clear dimensions and final kit contents require confirmation. This is not a manufacturer drawing, build specification or ADA-compliance certification.

$1,172.52

Exact kit material price · per kit

Hinge side is viewed from the front. Quantity: 1–99 whole kits. The nominal plan follows your hinge choice; the illustration always shows left-hand. Choose your confirmed finish during review.

Buy Now →

Cart review and Buy Now both require a confirmed finish, dimensions, delivery and final order approval before secure payment.

Illustrated finish is an example, not a color-bound offer. Available finishes are selected during review.

All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total).

Shipping and any applicable tax are separate from the kit material price. Installation and inside delivery are not included.

Kit specifications

Material
Solid Plastic (HDPE)
Nominal footprint
36″ W × 60″ D
Door
24″ · Inswing
Panel / door height
55″ / 55″
Layout / option
Between Walls · Standard
Mounting
Floor-mounted, overhead-braced
SKU
TP1-BW-STD-HD
Source stall size
36" x 60" w/ 24" inswing door
Source-listed components
Front pilasters, door, headrail and mounting hardware. No side panels: the stall fits an opening between existing walls.
Manufacturer / official specs
ASI standard material. Review supplied product specifications and available finishes in checkout

ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.

Optional help: Call Fred · 646-349-4040
Reference information

Owner-provided nominal dimensions. Clear dimensions and final shop drawings require confirmation.

Source-data-bound layout illustration, not a manufacturer photograph

Owner-attached JSON/CSV/HTML, November 19, 2026; owner-approved source price × 1.05

Internal draft ID: between-walls-standard-solid-plastic-hdpe (not a SKU).

Matching material reference · Solid Plastic (HDPE)

ASI technical data & warranty

Illustrated finish is an example, not a color-bound offer. The matching chart is a manufacturer reference; select only an available finish shown in checkout. Review the supplied construction, price and dispatch timing before payment. Call Fred if you need help.

25-year limited manufacturer warranty on HDPE against delamination, breakage and corrosion; see official warranty for conditions, exclusions and remedy.

Manufacturer material/series reference. The supplied ASI series, final component sizes and applicable coverage must match your written order. Listed dimensions above remain the current nominal kit configuration.

Visual draft, not a verified ASI assembly. Headrail runs, component counts and hardware must follow the applicable ASI drawings without added or omitted pieces.

Material specifications, hardware & care
Material constructionmanufacturer-material; specific-series
Single-sheet, solid, homogeneous HDPE plastic; waterproof and non-absorbent; mark-resistant self-lubricating surface; smooth-finished edges; foamed material prohibited.
Material thicknessspecific-series
1 inch (25 mm) for the standard floor anchored/overhead braced specification.
Standard door/panel heightspecific-series
55 inches (1397 mm).
Standard pilaster heightspecific-series
82 inches (2083 mm).
Bottom clearance / height above floorspecific-series
14 inches (356 mm).
Door widthspecific-series; ADA-related
24 inches minimum; 36 inches minimum at ADA accessible compartments.
Overall headrail heightspecific-series
Not documented as a separate numeric overall height in the reviewed standard specification.
Heat sinkspecific-series
Aluminum heat sink attached to the bottom of doors and panels.
Standard hardwarespecific-series
8-inch heavy-duty extruded aluminum wrap-around hinge with adjustable nylon cams; anodized aluminum latch; 6-inch aluminum wrap-around strike/keeper; chrome-plated coat hook and bumper; Type 304 stainless No. 4 satin theft-resistant fasteners; chrome-plated pulls standard on ADA compartments, two per ADA door.
Mounting systemspecific-series
Floor anchored/overhead braced with anodized aluminum anti-grip headrail and Easy Stall shoe; Type 304 stainless steel No. 4 satin shoe, 3 inches high, with concealed leveling adjustment.
Product-page hardware optionsoptional
Stainless stirrup brackets, stainless door hardware, continuous piano hinges, continuous anodized-aluminum or stainless brackets, no-sight privacy strips, and matte-black hardware are listed as options; inclusion is not established.
Moisture and humiditymanufacturer-material
Water resistant and unaffected by steam or high humidity.
Fire scopemanufacturer-material; specific-series
ASI states Solid Plastic Partitions have passed NFPA 286; this does not establish an hourly fire-resistance rating or universal code approval.
Care and cleaningmanufacturer-material
Clean with water and mild soap solution only. Do not use abrasive powders/pads, water-closet cleaners, ceramic-tile cleaners, solutions over 1% ammonia by volume, acids or lye, or enzyme-containing solutions.
Color / finishspecific-series; optional
Pebble-textured homogeneous color throughout is specified; ASI provides a color guide and advises requesting samples because monitor colors vary and colors may change. Other textures/options require confirmation.
Verified headrail arrangement 1manufacturer-diagram / condition-specific
FAOB specification PDF p. 3 §2.3.F: standard anodized aluminum anti-grip-profile headrail. Installation printed p. 2 / physical PDF p. 6, Step 6.D and Figure 6: plumb each pilaster and secure with headrail; front rail runs across front pilasters, above the 55-inch panels.
Verified headrail arrangement 2manufacturer-diagram / condition-specific
Installation printed p. 13 / physical PDF p. 17, HEADRAIL ASSEMBLY—POLYMER: assembled/exploded diagrams show a depthwise return rail connecting the transverse front rail to the BACK WALL with satin F brackets. This is an end/return connection condition, not a universal rail on each side.
Verified headrail arrangement 3manufacturer-diagram / condition-specific
Drawing 4.4 PDF p. 1 is a two-stall IC-2 standard configuration with actual rear/left walls and open right partition side; it depicts front rail plus right end/return rail. It is relevant to the owner's in-corner wall condition but is not an exact one-stall bill of materials or rail cutting schedule.
Verified headrail arrangement 4manufacturer-diagram / condition-specific
No reviewed HDPE FAOB source establishes a universal transverse rear-wall rail. BACK WALL in the p. 13 guide labels the wall receiving the return end; do not invent a rail across the rear wall or infer one from a photograph.
Verified headrail arrangement 5manufacturer-diagram / condition-specific
For the owner between-walls record, preserve front assembly only and zero side panels. These sources do not establish a required depthwise rail along either structural side wall for that exact one-stall condition; do not add one without a matching shop drawing.
Verified headrail arrangement 6manufacturer-diagram / condition-specific
Guide printed p. 13 P/N 8448100 lists 2 satin F Zamac brackets, 1 satin Zamac cap, 2 vandal-resistant 2½-inch sheet-metal screws, 2 shields, and 4 vandal-resistant ⅝-inch screws; additional stainless #14 × ⅝-inch screws depend on rail length. These counts describe the illustrated hardware assembly, not rail-piece totals in the owner's kits.
Verified assembly hardware 1manufacturer-diagram / condition-specific
Spec PDF p. 3 §2.3.C: brushed-anodized 8-inch aluminum wrap-around gravity hinges, aluminum slide latch and 6-inch wrap-around strike/keeper, chrome-plated coat hook/bumper with black rubber tip, and theft-resistant Type 304 stainless fasteners. Spec p. 4 §3.2.D–F requires hinges/latch, aligned keeper, and one coat hook and bumper per door.
Verified assembly hardware 2manufacturer-diagram / condition-specific
Guide printed p. 9 / physical PDF p. 13 P/N 8441007 inswing assembly has 2 complete hinges formed from four 4-inch housings, 1 stop/keeper, 1 slide latch, 1 bumper/coathook; listed fasteners: 21 one-inch step bolts, 21 half-inch barrel nuts, 2 ⅝-inch tamper-resistant screws and 4 ⅝-inch flathead screws. Printed p. 10 shows outswing separately and a third hinge optional for larger doors.
Verified assembly hardware 3manufacturer-diagram / condition-specific
Spec p. 3 §2.3.C.6: door pulls standard on ADA compartments, two per ADA door; do not claim they are universally included on the standard 24-inch door.
Verified assembly hardware 4manufacturer-diagram / condition-specific
Guide printed pp. 3–4 / physical PDF pp. 7–8 P/N 8445020 panel assembly shows 3 wall brackets plus 3 pilaster U-brackets for the illustrated side panel. One-ear and two-ear alternatives are separate conditions. Do not add panel hardware to the zero-side-panel between-walls record.
Verified assembly hardware 5manufacturer-diagram / condition-specific
Guide printed p. 2 Step 4.C: wall-adjacent pilasters will not have U-brackets. Printed p. 5 / physical PDF p. 9 P/N 8445210 shows 3 one-ear wall brackets and requires shop drawings for wall spacing.
Verified assembly hardware 6manufacturer-diagram / condition-specific
Spec p. 3 §2.3.D calls aluminum continuous brackets optional. Product/hardware pages also label stainless stirrup/continuous brackets, vault/piano/continuous hinges, no-sight strips, indicator/stainless latches and matte-black hardware options. Generic guide coverage is not proof of standard kit inclusion.
Verified assembly hardware 7manufacturer-diagram / condition-specific
Spec p. 3 §2.3.E–G and guide printed pp. 1–2: integral 3-inch Type 304 No. 4 satin Easy-Stall pilaster shoes, concrete anchorage and concealed leveling bolts; concrete floor and adequate wall/floor backing required. Detail 4.5 illustrates concrete screws, leveling bolts and shoe. Temporary 14-inch panel support is removed; do not render it as permanent side-panel feet.
Verified assembly hardware 8manufacturer-diagram / condition-specific
Spec p. 3 §2.3.A: 1-inch solid homogeneous non-foamed HDPE, ¼-inch radius machined edges, aluminum heat-sink strip at bottoms of doors and panels. Default spec finish is pebble-textured; current color card/product also offer specific alternate textures/woodgrain that must be selected.
Manufacturer warranty coverage & exclusions
  • Official warranty date issued October 17, 2019.
  • Warranty runs from the date of invoice under normal usage.
  • Solid Plastic (HDPE): 25 years against delamination, breakage, or corrosion.
  • If defective during the period, ASI may repair or replace the material at its discretion, free of charge.
  • Repair or replacement is the purchaser's sole remedy.
  • No credits or allowances for labor or expenses relating to repair or replacement of covered components.
  • No liability for incidental, consequential, or indirect damages caused by defects or delay in repair/replacement.
  • Exclusions include vandalism, improper installation, and improper cleaning/maintenance when they contribute to failure.
  • Warranty extends to commercial and industrial purchasers and expressly does not extend to other persons, including consumers of the partitions.
  • Warranty is in lieu of all other express or implied warranties, including merchantability and fitness for a particular purpose.
Read the full ASI manufacturer warranty (PDF)
Official ASI technical documents
Final specification items to confirm
  • The standard FA/OB specification's 55-inch door/panel and 82-inch pilaster dimensions must not be generalized to other mounting styles or privacy series.
  • Do not promise a separate overall headrail height because the reviewed standard specification does not document one numerically.
  • NFPA 286 passage is not an hourly fire-resistance rating or universal fire/code approval.
  • Warranty wording is commercial/industrial-purchaser-limited and excludes consumers; do not imply every ecommerce shopper is a covered claimant.
  • Preserve the merchant powder 1-year replacement-only warranty separately; do not merge it with ASI's manufacturer warranty.
  • generic laminate pricing does not establish Moisture Guard; generic phenolic pricing does not establish Color-Thru or optional Class A; standard stainless Satin does not establish unsupported No. 4.
  • Do not promise stock, delivery, ADA compliance for an unverified configuration, or prices.
  • Exact one-stall replica is not established by the generic ASI examples. Obtain the supplier-approved handed36-by60 shop drawing, component/package list and rail cut/return/end-connection schedule before changing or approving artwork. Current illustrations are not verified ASI assemblies.
Store ordering, shipping & warranty terms

Front pilasters, door, headrail and mounting hardware. No side panels: the stall fits an opening between existing walls. Existing structural walls and installation are not included.

All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total). Inside delivery is not implied.

All sales are final. Every partition order is custom-built; cancellations, returns and refunds are not accepted after an order is placed. Payment approves the final drawing dimensions, or the items as quoted and described. Review all dimensions and details before approving.

Have a qualified professional verify measurements and handle installation. Incorrect measurements, improper installation and damage after delivery are not covered by Partition Stalls.

Partition Stalls separately warrants powder-coated materials against defects in workmanship and construction for one year from purchase under normal use and proper care. Remedy is replacement materials only, without labor credits or other replacement costs. Installation errors, vandalism and improper use, care or maintenance are excluded. This store warranty is distinct from ASI manufacturer coverage.

Taxes are not currently collected; purchases are not tax-exempt. Review dispatch timing for the supplied material and selected finish in checkout. Quick-ship or delivery eligibility is not established by this illustrative ad.

Buy Now opens exact-kit order review. Select your finish, verify dimensions and delivery, and approve the final items before secure payment. Call Fred only if you need help. ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.