ASI Global PartitionsAccessibility symbol — ADA optionADA option

1-Stall In Corner ADA Partition Kit – Solid Phenolic

SKU: TP1-IC-ADA-SP · In Corner · 60″ W × 60″ D

ADA option only. Final compliance depends on approved layout and installation; not an ADA-compliance certification.

Nominal plan only; no accepted perspective assembly image is shown.

1-Stall In Corner ADA Partition Kit – Solid Phenolic. SKU TP1-IC-ADA-SP. Illustrative nominal floor plan: 60 inches wide by 60 inches deep; 36-inch door, outswing, left-hand hinge viewed from the front. Solid Phenolic; 58-inch panels and 58-inch door; Floor-mounted, overhead-braced. Back + side wall · one side panel. One side panel, front pilaster(s), door, headrail and mounting hardware. Existing back and side walls form the remaining boundaries. Actual wall and support conditions need confirmation; not a manufacturer drawing, build specification or ADA-compliance certification.60″ wide60″ deep36″ door · OutswingL hinge · viewed from front
Illustrative nominal layout

Nominal key plan

Existing back + left structural walls. One right side partition panel.

Thick dark lines:
structural walls.
Thin gray lines:
partition panels.
Red arc:
door swing.

Nominal dimensions: 60″ wide × 60″ deep; 36″ door · Outswing · left-hand hinge viewed from the front.

Shop drawings set final clear dimensions and component sizes. Verify your field measurements before approving the order.

Walls, side panels and fillers reflect the owner-source nominal layout. Actual wall and support conditions, clear dimensions and final kit contents require confirmation. This is not a manufacturer drawing, build specification or ADA-compliance certification.

$1,922.35

Exact kit material price · per kit

Hinge side is viewed from the front. Quantity: 1–99 whole kits. The nominal plan follows your hinge choice; the illustration always shows left-hand. Choose your confirmed finish during review.

Buy Now →

Cart review and Buy Now both require a confirmed finish, dimensions, delivery and final order approval before secure payment.

Illustrated finish is an example, not a color-bound offer. Available finishes are selected during review.

All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total).

Shipping and any applicable tax are separate from the kit material price. Installation and inside delivery are not included.

Kit specifications

Material
Solid Phenolic
Nominal footprint
60″ W × 60″ D
Door
36″ · Outswing
Panel / door height
58″ / 58″
Layout / option
In Corner · ADA option
Mounting
Floor-mounted, overhead-braced
SKU
TP1-IC-ADA-SP
Source stall size
60" x 60" w/ 36" outswing door
Source-listed components
One side panel, front pilaster(s), door, headrail and mounting hardware. Existing back and side walls form the remaining boundaries.
Manufacturer / official specs
ASI standard material. Review supplied product specifications and available finishes in checkout

ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.

Optional help: Call Fred · 646-349-4040
Reference information

Owner-provided nominal dimensions. Clear dimensions and final shop drawings require confirmation.

Source-data-bound layout illustration, not a manufacturer photograph

Owner-attached JSON/CSV/HTML, November 19, 2026; owner-approved source price × 1.05

Internal draft ID: in-corner-ada-solid-phenolic (not a SKU).

Matching material reference · Black Core Phenolic

ASI technical data & warranty

Illustrated finish is an example, not a color-bound offer. The matching chart is a manufacturer reference; select only an available finish shown in checkout. Review the supplied construction, price and dispatch timing before payment. Call Fred if you need help.

Use the Black Core section of the phenolic chart. Color-Thru-only colors and optional Class A construction are not established for this kit.

ASI Black Core/Color-Thru Phenolic carries a 25-year material warranty against delamination, breakage, or corrosion from invoice date; repair or replacement is at ASI’s discretion, subject to the full warranty’s exclusions and commercial/industrial-purchaser limits.

Manufacturer material/series reference. The supplied ASI series, final component sizes and applicable coverage must match your written order. Listed dimensions above remain the current nominal kit configuration.

Visual draft, not a verified ASI assembly. Headrail runs, component counts and hardware must follow the applicable ASI drawings without added or omitted pieces.

Material specifications, hardware & care
Material constructionmanufacturer-material
Black Core Phenolic sheets are fused at high temperature and pressure; the standard specification describes a solid phenolic core of melamine-resin-impregnated kraft paper fused under high temperature and pressure.
Standard mounting basisspecific-series
Standard floor anchored/overhead braced toilet compartment specification.
Standard floor clearancespecific-series
12 inches (305 mm) above finished floor.
Standard door/panel heightspecific-series
58 inches (1473 mm).
Standard pilaster heightspecific-series
82 inches (2083 mm).
Standard door/pilaster thicknessspecific-series
3/4 inch (19 mm).
Standard panel/screen thicknessspecific-series
1/2 inch (13 mm).
Edgesspecific-series
Black core edges.
Fire ratingmanufacturer-material
Black Core is Class B fire-rated as standard; Class A fire-rated material is listed as an option.
Class A distinctionoptional
The standard specification distinguishes Black Core Class B from Color-Thru Class A; do not present Class A as standard Black Core.
Door widthspecific-series
The official standard specification says door width is as indicated on project drawings; it does not confirm a universal 24-inch door width.
Door hardwarespecific-series
Vault hinge; heavy-duty top hinge; gravity-cam bottom hinge; satin-chrome slide latch; emergency-access strike/keeper; coat hook and bumper.
Fasteners and bracketsspecific-series
Type 304 stainless No. 4 satin theft-resistant fastening hardware and Type 304 stainless No. 4 satin stirrup brackets.
Headrailspecific-series
Manufacturer-standard anodized aluminum rail with anti-grip profile.
Pilaster anchorspecific-series
Easy Stall shoe system; Type 304 stainless steel shoe, documented as 3 inches high, with concealed leveling adjustment.
Caremanufacturer-material
Clean with water and mild soap only; ventilate high-humidity rooms; periodic standard furniture wax is beneficial.
Moisture restrictionsmanufacturer-material
Do not hose down or wet-wash; this may cause water absorption and damage.
Prohibited cleanersmanufacturer-material
Avoid abrasive powders/pads, water-closet cleaners, ceramic-tile cleaners, solutions over 1% ammonia, acids, lye, and enzyme-containing solutions.
Verified headrail arrangement 1manufacturer-diagram / condition-specific
Spec PDF p. 3 §2.3.E: standard anodized aluminum anti-grip headrail. Installer pp. 7–9 says rail may be positioned across adjacent pilasters; detail 6.4 PDF p. 1 depicts front run across door/pilaster line connected to structural side wall. Exact one-stall cut lengths and fittings are not scheduled.
Verified headrail arrangement 2manufacturer-diagram / condition-specific
Detail 6.4 PDF p. 1 shows an exposed-end return from the front run along the outer partition to the back structural wall. Installer p. 12 Headrail Assembly — Phenolic shows a return termination at BACK WALL and rail-run connection. This supports the depicted end condition, not a return on every panel or structural side wall.
Verified headrail arrangement 3manufacturer-diagram / condition-specific
No reviewed FAOB source establishes a universal rail across the rear wall. BACK WALL on installer p. 12 labels a return endpoint, not a cross-rear rail. Do not invent cross-rear or all-wall perimeter rails from generic photographs.
Verified headrail arrangement 4manufacturer-diagram / condition-specific
In-corner owner draft remains rear+left structural walls and one right panel; its exposed right end corresponds to the illustrated return condition, but exact handed schedule is missing. Between-walls remains rear+left+right structural walls and front assembly only; do not add side panels or side/back rails to the owner record.
Verified headrail arrangement 5manufacturer-diagram / condition-specific
Installer p. 12 Headrail Hardware Kit P/N 8448100 lists two satin Zamac F brackets, one satin Zamac cap, two stainless #14×2.5-inch wall screws, two shields, and four 5/8-inch sheet-metal screws. These are sub-kit quantities, not one-stall rail counts or proof one kit is required per stall.
Verified assembly hardware 1manufacturer-diagram / condition-specific
Spec p. 3 §2.3.A: 3/4-inch doors/pilasters, 1/2-inch panels, black-core edges. Spec p. 4 §3.3.D–F: per door, top+bottom vault hinges, one latch, aligned strike/keeper, and one coat hook/bumper; bottom gravity cams and lift-clear emergency access are specified on p. 3.
Verified assembly hardware 2manufacturer-diagram / condition-specific
Standard spec p. 3 §2.3.D uses Type 304 stainless No. 4 satin stirrup brackets and theft-resistant fasteners. Installer p. 7 panel kit 8275020: two two-ear wall brackets, two U brackets, four each 1/2-inch step bolts, barrel nuts, 2.5-inch wall screws, shields, and 3/4-inch sheet-metal screws. Page 8 one-ear kit 8275010 is an alternative with two one-ear brackets, not an additive kit.
Verified assembly hardware 3manufacturer-diagram / condition-specific
Installer p. 9 wall-pilaster kit 8275210 lists two one-ear wall brackets, two 3/4-inch step bolts, six barrel nuts, four 2.5-inch screws, four shields, and four 1/2-inch step bolts. Apply only where the exact layout has that connection; p. 6 Step 4.C says wall pilasters do not require rear U brackets.
Verified assembly hardware 4manufacturer-diagram / condition-specific
Installer p. 10 inswing door kit 8571005 and p. 11 outswing kit 8571006 have different keeper/pull/bumper arrangements. Preserve owner-selected swing/handing; do not combine both kits or choose handing from a generic drawing.
Verified assembly hardware 5manufacturer-diagram / condition-specific
Spec p. 3 §2.3.F specifies Easy-Stall pilaster shoes, Type 304 stainless, 3 inches high, concealed leveling bolts and 1/4×2-inch concrete screws. Detail 6.5 EZ p. 1 depicts two leveling bolts/two concrete screws at its shown pilaster. Installer p. 5 requires concrete floor and adequate backing; p. 6 removes the temporary panel support. Extra side-panel feet are not established as standard inclusions.
Verified assembly hardware 6manufacturer-diagram / condition-specific
Product page options: piano hinges, continuous aluminum/stainless brackets, custom colors, no-sight strips, Class A material; Class B is standard. Hardware page labels stainless vault/continuous hinges and several slide/indicator latches optional, and occupancy/barrel-hinge hardware privacy-specific. Do not silently add options to a standard kit.
Verified assembly hardware 7manufacturer-diagram / condition-specific
Sub-kit counts do not establish total stall BOM. Zero side panels in between-walls means no automatic allocation of panel connection kits; exact pilaster/rail/shoe/anchor quantities need the project shop drawings/package list.
Manufacturer warranty coverage & exclusions
  • Full ASI warranty PDF issued October 17, 2019; coverage runs from date of invoice.
  • Black Core/Color-Thru Phenolic: 25 years against delamination, breakage, or corrosion.
  • If defective during the period, ASI may repair or replace the material at its discretion, free of charge.
  • Repair or replacement is the purchaser’s sole remedy; no labor or repair/replacement expense credits or allowances.
  • No liability for incidental, consequential, or indirect damages, including delay in repair or replacement.
  • Exclusions/limitations: vandalism, improper installation, or improper cleaning/maintenance contributing to failure.
  • Warranty extends to commercial and industrial purchasers and expressly does not extend to other persons, including consumers of the partitions.
  • Warranty is in lieu of other express or implied warranties, including merchantability and fitness for a particular purpose.
  • The PDF states no separate claim deadline, registration requirement, or service-area promise.
Read the full ASI manufacturer warranty (PDF)
Official ASI technical documents
Final specification items to confirm
  • Do not silently change owner data: retain nominal36x60, 24inswing, and 58door/panel; confirm the exact nominal footprint and 24-inch door against final shop drawings.
  • Preserve the merchant powder1year replacement-only warranty separately; do not substitute ASI’s 25-year phenolic warranty for it.
  • no powder-coat claim is established for Black Core Phenolic.
  • Generic laminate pricing does not establish Moisture Guard; generic phenolic pricing does not establish Color-Thru or optional Class A.
  • Do not promise stock, delivery, ADA, or prices; do not present unconfirmed exact component specs as selling facts.
  • ASI warranty language is not an unconditional consumer warranty: it excludes consumers and limits coverage/remedy as stated in the full PDF.
  • ASI product-page wet-service wording conflicts with the installation guide instruction not to hose down or wet-wash. Use the installation/care limits and confirm application with ASI before specifying washdown service.
  • Exact one-stall replica is not established by the generic ASI examples. Obtain the supplier-approved handed36-by60 shop drawing, component/package list and rail cut/return/end-connection schedule before changing or approving artwork. Current illustrations are not verified ASI assemblies.
  • Spec describes brushed-chrome die-cast aluminum vault hinges; current hardware page calls its pictured standard vault hinge brushed-chrome Zamac. Resolve alloy wording with supplier rather than inventing hardware.
Store ordering, shipping & warranty terms

One side panel, front pilaster(s), door, headrail and mounting hardware. Existing back and side walls form the remaining boundaries. Existing structural walls and installation are not included.

All five kit materials: $399 flat shipping per order to one address in the contiguous 48 states and Washington, DC, regardless of kit quantity. Optional liftgate / limited-access service adds $100 once per order ($499 shipping total). Inside delivery is not implied.

All sales are final. Every partition order is custom-built; cancellations, returns and refunds are not accepted after an order is placed. Payment approves the final drawing dimensions, or the items as quoted and described. Review all dimensions and details before approving.

Have a qualified professional verify measurements and handle installation. Incorrect measurements, improper installation and damage after delivery are not covered by Partition Stalls.

Partition Stalls separately warrants powder-coated materials against defects in workmanship and construction for one year from purchase under normal use and proper care. Remedy is replacement materials only, without labor credits or other replacement costs. Installation errors, vandalism and improper use, care or maintenance are excluded. This store warranty is distinct from ASI manufacturer coverage.

Taxes are not currently collected; purchases are not tax-exempt. Review dispatch timing for the supplied material and selected finish in checkout. Quick-ship or delivery eligibility is not established by this illustrative ad.

Buy Now opens exact-kit order review. Select your finish, verify dimensions and delivery, and approve the final items before secure payment. Call Fred only if you need help. ASI standard sizes, configurations and finishes only; no custom or premium options. Review and approve your exact order before secure payment.