Current Bradley partitions / Mills specification references

Bradley Toilet Partitions & Mills Bathroom Stalls

Bradley toilet partitions and bathroom stalls include phenolic privacy systems, stainless-steel partitions, and five Euro cubicle families. Compare the material construction, mounting arrangement, and privacy details before selecting a system. Send Partition Stalls your drawings or dimensions to request a project-specific Bradley quote.

Request Bradley Pricing Compare systems

Bradley toilet partitions & cubicles

Current Bradley families—not the full historic Mills catalog.

Current published families include Phenolic Privacy, Stainless Steel, and the five Euro series below. Bradley identifies Bradmar HDPE, powder-coated steel, and plastic laminate partitions as discontinued. Those legacy lines are not shown as current products here.

Solid compact phenolic laminate

Phenolic Privacy Partitions

Solid compact-laminate construction differs from Bradley Phenolic LT Euro panels. Rabbeted door edges provide the standard No-Site treatment at door-to-pilaster joints; indicator latches are standard. Choose mounting separately: Series 400 overhead-braced, 500 floor-braced, 600 ceiling-hung, or 700 floor-to-ceiling.

Compare: Solid compact construction, No-Site joints, and mounting series.

Manufacturer system reference

Stainless steel

Stainless Steel Partitions

Compare satin-brushed and 5WL textured finishes with wrapped panel edges. Permaseal joins the facing sheets around the perimeter. Four mounting series are documented; taller doors and panels are an option, not a universal fully enclosed or gap-free specification.

Compare: Satin versus 5WL faces, perimeter construction, and height package.

Manufacturer system reference

Phenolic LT sandwich construction: phenolic faces, foam core, aluminum edges

Euro — Loft

Loft positions feet and headrail at the front face, unlike Float's recessed arrangement. Specify door swing and hinge choice rather than promising the same concealed hinge on every door. The technical sheet's narrative and selection table are not fully consistent about the 110-degree hinge on out-swing doors; confirm that selection for the quote.

Compare: Front-face feet/headrail and approved door-specific hinge choices.

Manufacturer system reference

Phenolic LT sandwich construction: phenolic faces, foam core, aluminum edges

Euro — Float

Float recesses feet and headrail to change the front appearance. Optional LED occupancy indicators and the optional Nexa-connected occupancy system require coordinated power and wiring; they are not included in every Float configuration.

Compare: Recessed feet/headrail and optional electrical occupancy features.

Manufacturer system reference

Tempered glass; current technical data describes back-painted laminated glass and a ceramic-screen-printed single-lite alternative

Euro — Lucent

A glass system with stainless-steel fittings and recessed headrail. Finalize accessory holes before production; no installation-time glass modifications are permitted. Omit exact system height until confirmed because height text and drawing dimensions in the current technical sheet differ.

Compare: Glass construction, preplanned attachment holes, and room layout.

Manufacturer system reference

Phenolic LT sandwich construction: phenolic faces, polyurethane foam core, aluminum edges

Euro — Highrise

Room-height construction uses continuous floor, wall, and ceiling brackets. August 2026 technical data allows site-dimension fabrication to a maximum 109.6-inch system height and 108.3-inch door height. Optional LED indicators need a different handle choice; drop ceilings need structural support.

Compare: Room-height support, Phenolic LT construction, and final dimensions.

Manufacturer system reference

Tempered back-painted glass on both sides of an internal aluminum frame

Euro — Skyline

Room-height glass-faced construction connects to floor, walls, and ceiling with continuous brackets. August 2026 technical data gives a maximum system height of 118.1 inches. Finalize glass accessory holes and ceiling support before fabrication.

Compare: Glass-faced room-height assembly, ceiling support, and preplanned holes.

Manufacturer system reference

Before requesting brand-specific pricing

Three checks for a useful Bradley quote.

Review these inputs with the current named-system literature before treating the specification as complete. Final technical and accessibility requirements belong to the selected project.

Identify material and family: Specify solid compact phenolic versus Phenolic LT, stainless-steel finish, or the exact glass family. A material label does not establish manufacturer or replacement fit. Bradley's Euro product FAQ says it does not sell Euro panels separately; confirm any replacement request individually.
Document layout, mounting, and clearances: Provide finished-room dimensions, stall widths and depths, door swing, floor clearance, ceiling height, and structural support. Bradley prefers Euro measurements to the nearest millimeter. Conventional 72-inch-high material is limited to overhead-braced or floor-to-ceiling applications; room-height Highrise and Skyline have their own layout requirements.
Resolve hardware and accessories before approval: List privacy treatment, hinge and latch choice, accessory positions, and any occupancy indicators. No-Site strips are restricted to concealed latches and cannot be used at flat-strike locations. Glass attachment points must be finalized before production; electrical options need coordinated power and wiring.

Compare material directions:Stainless Steel Phenolic

The Budget Calculator uses general owner-approved material allowances. It does not price Bradley series, establish an approved substitution, or confirm a final specification. Use a written project quote for the named system.

Practical buying questions

Bradley partition questions.

Does Bradley still make Mills toilet partitions?: Bradley currently lists stainless-steel and phenolic privacy partitions, and Mills remains a Bradley partition trademark. However, Bradmar HDPE, powder-coated steel, and plastic laminate are officially discontinued. A legacy Mills specification should be checked against the current family, not treated as an orderable catalog by itself.
Official manufacturer references: [1] · [2] · [3] · [4] · [5]
Is Bradley Phenolic LT the same as solid phenolic?: No. Bradley describes its Phenolic Privacy partitions as solid compact laminate, while its Phenolic LT Euro panels combine phenolic faces with a foam core and aluminum edges. Loft, Float, and Highrise use Phenolic LT, so the quote should name the construction rather than simply say phenolic.
Official manufacturer references: [1] · [2]
Are all Bradley Euro partitions floor-to-ceiling?: No. Loft, Float, and Lucent use feet and a headrail; Highrise and Skyline are room-height systems secured to floor, walls, and ceiling. Their dimensions and accessory requirements differ, so select a named series before checking the room layout.
Official manufacturer references: [1] · [2] · [3] · [4] · [5]

Supply & project review

Request a Bradley toilet partition quote.

Share the named system, quantity, room plans, finish direction, and delivery location. Partition Stalls supplies materials nationwide; installation scope is reviewed for the eight full-service states.

Manufacturer/series, configuration, compatibility, freight, tax, availability, timing, and final price are confirmed in the written quote. Published manufacturer literature remains the technical reference; public access does not grant rehosting or redistribution rights.

Get a Quote Review service coverage